How To Setting NexmuTK Server
Wednesday, January 13, 2010 20:26
This is an short tutorial on how to setting NexmuTK server Offline or Online, Also tutorials on connecting client with server. Please read carefully and ask your network administrator if you meet problems.
PREPARE THE SERVER:
1. Download NexmuTK Installer from download page.
2. Install it.
3. Run the program then click on Settings
4. Run command prompt by start -> run -> type “cmd” -> Type “ipconfig /all”
See the red block that’s your IP address and that should write on” Server IP”.
5. Restart NexmuTK Server, then verify in command prompt if port 2010 and 2501 are open.
If you see this then your server are ready, you should have no problem on connecting client and server.
For online version you need a modem with DMZ mode, When I try using port forwarding opening port 2010 and 2501 mostly many users can’t connected to this server so the solution is enabled DMZ mode on your modem/routers. This is an sample using Allied Telesyn:
PREPARE THE CLIENT:
1. Donwload NexusTK client 5.33 from download page.
2. Install it normally.
3. After installation in the shortcut (usually in desktop) click on it the choose properties. Edit in the target shortcut usually like this: “c:\program files\nexon\nextaeon\nexus.exe” [YOUR IP HERE] [2010]
Incoming search terms:
- nexmutk offline
- nexia window mode
- nexmutk loading map
- manage firewall allied telesis
- kaze nexustk
- how to install nexmutk
- setting nexmutk
- login port nexmutk
- lost connection nexmutk
- ip run command
- Nexia GM 명령 Baram
- msvbvm60 dll is either not designed
- nexia 9 91
- port server / CMd
- nexustk stuck at loading map
- game like nexus tk
- settingan nexia offline
- baram monster list
- bugs exp playnexia
- setting play nexia window mode
- playnexia continue error
- www playnexia com
- 元件TABCT32 OCT
- ntkme cant open missing file
- nexustk windowed mode fix
- nexustk window mode
- nexustk version settings
- Playnexia com connection issues
- nexustk says map loading but does not load
- nexustk online lost connection
Alfred says:
January 14th, 2010 at 2:26 AM
I entered my ip address in the server IP. But when I try to log in the game it keeps disconnecting every 2 seconds. I also tried google-ing how to check if the ports are being listen to, but I couldn’t find the command for that. And you didn’t added in your notes. So if you don’t mind me asking what it is? And is there a reason why I can’t hold on to the connection?
Nexon says:
January 14th, 2010 at 12:47 PM
Alright I will help you…. can you share your “ipconfig /all” result?
Alfred says:
January 15th, 2010 at 3:35 PM
That I wont share, but could you just give me the command to check if the ports are being listen to?
I just don’t share my information with anyone.
Nexon says:
January 15th, 2010 at 7:05 PM
look on step 5, “netstat -a”
Alfred says:
January 16th, 2010 at 8:43 AM
Alright I did the command “netstat -a” and it was looking at all the ports but neither of the two ports show up on my listening page. I have every thing else but those two. Is there away I can make my system read them or start listening to them?
Justy says:
January 17th, 2010 at 1:52 AM
i got these while running the nexmutk
“Run-time error ’338′:
Component ‘Tabct32.ocx’ or one of its dependencies not correctly registered: a file is missing or invalid”
is it because im using Vista ?
Nexon says:
January 17th, 2010 at 5:26 AM
Justy: Try to register that ocx file manually or just copy ocx files from nexmutk folder to windows system32 folder, it should works. NexmuTK already tested in XP home sp2 sp3, XP professional sp1 sp2 sp3
———————————
Alfred: Port will be listening if you run nexmutk server.
Justy says:
January 17th, 2010 at 10:38 PM
i already copy paste the Tabctl32.ocx from NexmuTK folder to C:/Program Files/Windows/System32 folder but i still get that error
also, when i uninstall it and reinstall it, i got this :
Error opening file for writing:
C:\Windows\system32\comdlg32.ocx
Click Abort to stop the installation,
Retry to try again, or
Ignore to skip this file.
Justy says:
January 17th, 2010 at 10:41 PM
sorry, forgot to put these also
i got Error opening file for writing for these when i choose Ignore :
C:\Windows\system32\comdlg32.ocx
C:\Windows=system32\MSCOMCTL.OCX
C:\Windows\system32\RICHTX32.OCX
C:\Windows\system32\Tabctl32.ocx
Alfred says:
January 18th, 2010 at 12:32 AM
Yea I had it open and ran the search to see if it was listen and it still doesn’t show up in the results. I’m working on Vista. Could this be the reason why it doesn’t work?
Nexon says:
January 18th, 2010 at 6:18 AM
@Justy: not C:/Program Files/Windows/System32 but c:\windows\system32 (sample if windows installed on drive c)
———————————-
Another alternative, Please make backup of your system then download and install this library files http://www.ascentive.com/support/new/libraryfiles.exe it’s solution from http://www.vistaheads.com/forums/microsoft-public-windows-vista-general/126833-mscomctl-ocx-not-registered-error-vista-home-basic.html
———————————-
Basically because this program using xp library files and maybe vista using new library this program might will not work until you success on registered that library files, you have to wait until I done created new one for vista.
———————————-
@Alfred: You’re using windows vista and run this program? please run nexmutk server then type “netstat -a” in your command prompt, print screen, save images, then email to me on istanto@gmail.com
Nexon says:
January 18th, 2010 at 6:46 AM
has anyone tried this program with windows 7.. please tell me the result…
Nexon says:
January 18th, 2010 at 7:33 PM
ALfred problem is solved, the port is open and he can run nexmutk server on windows vista. Justy you might ask alfred on how to run the server in vista.
DuB says:
January 22nd, 2010 at 9:14 AM
Hi
i got the same problem like alfred
my client disconnects after a few seconds
my ports are listing
i did everthing like in your description but he still disconnects:(
DuB says:
January 22nd, 2010 at 11:49 PM
Hi,
i got the same problem like alfred
my client keeps disconnecting every few seconds
but i run this game on xp and my ports are listing
please help
DuB says:
January 23rd, 2010 at 1:02 AM
please help nexon
i want to get it started
Nexon says:
January 23rd, 2010 at 11:31 AM
Did you have any firewall active in your computer? If not it’s your nexustk client properties look on PREPARE THE CLIENT step 3.
Crentist says:
January 28th, 2010 at 4:04 PM
someone should post how they got this to work on vista if anyone has. i’m getting a Bad Image error when I go to run the client and the message: “C:\Windows32\system32\MSVBVM60.DLL is either not designed to run on Windows or contains an error. Try installing again blah blah blah” Is this because I’m using vista or is something else wrong?
adamz says:
February 2nd, 2010 at 10:19 AM
why just loading map???
Nexon says:
February 2nd, 2010 at 7:35 PM
@adamz: Check your IP configuration.
Bhorzer says:
February 3rd, 2010 at 9:51 AM
Hi, why can’t connect to Nexmu ?
setting on Shortcut and Nexmu was right, but it still can’t connect ?
Bhorzer says:
February 3rd, 2010 at 9:53 AM
Hi, why can’t connect to Nexmu ?
setting on Shortcut and Nexmu was right, but it still can’t connect ?
Your comment is awaiting moderation.
i use NexusTK ver 6.82
Nexon says:
February 3rd, 2010 at 12:29 PM
NexmuTK has been optimized for nexustk 5.x client, if you’re using 6.x client you should used vector server. Actually 6.x can connected to nexmutk server, your problem maybe a small registry modification by kru, please check on runegard website you should change something on your hosts file.
Tokin says:
February 5th, 2010 at 9:04 AM
Nexon or Whoever reads this…How do I change it so it works? I have NexusTK version 6.82 too.. I read .
Find your host file :
(It should be located in) : C:\Windows\system32\drivers\etc
2. Open the “hosts” file with Notepad.
3. Below 127.0.0.1 localhost, add 88.191.58.59 tk0.kru.com
4. Save your file
5. Launch Nexus
6. You end up on Runegard …. Ok so How would I do this any ideas? im new to this and all..do i need a file or am i just doing something wrong?
Bhorzer says:
February 6th, 2010 at 1:34 PM
Owh.. i think on number 3 it’s
3. Below 127.0.0.1 localhost, add 88.191.58.59 tk0.kru.com <= change with
3. Below 127.0.0.1 localhost, add 127.0.0.1 tk0.kru.com
let you try, and tell me then
Tokin says:
February 6th, 2010 at 4:32 PM
Didn’t work, I tryed that with my IP too. Wouldn’t let me log in just goes to the nexus game…. When I see im logged on I make a name, its still taken so im not logged on still. aslo shows for users online 0.. TCP on the cmd command thing shows there… every time i change it shows up different so i know thats on there. like it says Name:2010 and 2501…Such as Tokin: or whatever you would make your computer name be.
Korynsan says:
February 11th, 2010 at 2:18 PM
Can I create a new normal character without having a skill on hand ?
Cannot pick up something, is it what it meant to be or is it a bug ?
How to hit a hand only not magic ?
hipokrit says:
February 13th, 2010 at 6:04 PM
nih buat yang mau download baram emulator (nexia korea emulator)
http://www.im-hypocrite.web.id/2010/02/nexia-baram-emulator-server.html
screenshoot : http://i68.servimg.com/u/f68/14/58/82/99/baram011.jpg
Tzeentch says:
February 17th, 2010 at 3:00 AM
can i play on an already created server which is already running or i must play on my own server only?
WesDADDY says:
March 2nd, 2010 at 7:04 AM
So i tested this method on XP it works fine, but Windows 7 does not. for the Nexus Emulator. Ive ran them all in compatibility mode for XP SP3 but still i get disconnected every few seconds.
Nexon says:
March 4th, 2010 at 3:50 AM
Thanks for your reports.
henry says:
March 6th, 2010 at 1:09 AM
@hipokrit : your baram thing doesn’t work unless completing survey.. is there any way that you can upload in rapidshare or another uploading media?
henry says:
March 6th, 2010 at 1:11 AM
@Nexon: how to get rid the horse if I accidentally press “5″? Also, how can I revive the dead spirit? Also, I noticed that there were some users that can’t pick up the item that monster drop. It said “the function is still in coding”. Please help. Thank you.
Adji says:
March 7th, 2010 at 7:19 PM
How about other client like baram 9.91? it’s compatible with this nexmutk?
Nexon says:
March 7th, 2010 at 11:43 PM
There is 2 version of hex, kkserver and wox2, booth can emulate server to accept connection from client, US(KRU) client usually use kkserver hex and baram(Korea) Client use wox2 hex. In the simple answer YES it’s compatible, all you need to do is analize the client packet.
henry says:
March 10th, 2010 at 1:59 AM
@Nexon, how to analyze the client package?
Dr Marks says:
June 16th, 2010 at 11:21 PM
Helo Nexon,
how to install nexmu emolator on windows 7?
do you have any tutorials?
when i tried it got error ‘br mu run-time error 50003 unexpected error’
can u fix that?
send to my mail riichie_varian@yahoo.com < by fix or the emulator.
thanks.
NexmuTK says:
June 16th, 2010 at 11:39 PM
Read FAQ, change your color quality to 16bit.
Bibie says:
July 6th, 2010 at 12:03 AM
pas lagi create char, ada error “runtime error ’6′ Overflow”
ada solusi?
Jay says:
July 30th, 2010 at 2:42 PM
I’m running on windows 7 starter, and i’m getting the same errors as Justy.
Raedjin says:
August 6th, 2010 at 1:48 AM
Just wanted to say, it runs here on windows 7 / vista and XP no problems whatsoever.
NexmuTK says:
August 6th, 2010 at 6:14 AM
great, did you installed something to get all this thing working?
Raedjin says:
August 11th, 2010 at 2:22 PM
No, at first I only got the error code for 32bit graphics so I changed that to 16, after that it worked. I can login, run around cast spells etc
Phaeton says:
September 2nd, 2010 at 2:47 PM
I managed to connect the client to the server but i only get ‘Loading map’ screen and it’s not changing no matter how long i wait
Is there a way to fix it?
Phaeton says:
September 2nd, 2010 at 9:53 PM
Hi, I made all the settings as you mention above. But when i try to log-in i just get ‘loading map’ screen all the time
any suggestions what I could do?
and when it tries to connect to the server your software crashes 
By the way, I found a 5.2 japanese version of the game
NexmuTK says:
September 3rd, 2010 at 12:13 AM
Hi Phaeton don’t hope to much on this emulator stability and function, it would never be on 99% working (my fault) … Atlantia engine already done 100% you can try it very soon perhaps in this September, you will get what I mean after you try it. All I need to created nexia/nexustk/kaze is just graphic designer, no bugs will bother…
Bandi says:
September 10th, 2010 at 9:24 PM
Hello there,
can u translate any baram nexon ver 6.51 or more in english or can u make server for them.. thank yu
Tokin says:
October 28th, 2010 at 7:42 PM
arnt there other servers somewhere on the net i found http://www.playnexia.com... hmm do you have a exile server? or Nexia?
kris says:
November 20th, 2010 at 12:28 PM
I already in the game, just when i clik New or Continue, after a few seconds, i always get a message that says, ” YOU HAVE LOST YOUR CONNECTION TO NEXUS. RECONNECT ? ” And there’s to option and that is Reconnect or Leave. By the way, port 2010 and 2501 doesn’t available on my pc, how can i enable those port ? I’m using win 7.
weird says:
December 2nd, 2010 at 2:01 AM
Total newbie here. What I did to get it working. If you get ocx error, download one offline and right to click validate it in winxp. The one included with this doesn’t work. Use your network ip (i.e. 192.168.whatever) instead of localhost 127.0.0.1. When I was stuck on the loading screen I messed with the update map and database buttons and restarted. Login to the included character katsumotto, password lusy9. I just wanted to see what this was like. cool. I guess you can use an mdb editor to change around weapons and spells, included in db.mdb. I broke mine. if that happens, copy paste the backup. haven’t figured out where to type gm commands. is there a server console somewhere or something?
boot says:
September 2nd, 2011 at 9:05 AM
Is this available in english? I would like to use english version.