NexmuTK » tutorial http://www.nexmutk.com NexusTK Server Emulator, Atlantia MMORPG Development Thu, 08 Jul 2010 20:53:57 +0000 en hourly 1 http://wordpress.org/?v=3.0 How To Setting NexmuTK Server http://www.nexmutk.com/2010/01/how-to-setting-nexmutk-server.html http://www.nexmutk.com/2010/01/how-to-setting-nexmutk-server.html#comments Wed, 13 Jan 2010 13:26:41 +0000 NexmuTK http://www.nexmutk.com/?p=223 This is an short tutorial on how to setting NexmuTK server Offline or Online,  Also tutorials on connecting client with server. Please read carefully and ask your network administrator if you meet problems.

PREPARE THE SERVER:

1. Download NexmuTK Installer from download page.

2. Install it.

3. Run the program then click on Settings

4. Run command prompt by start -> run -> type “cmd” -> Type “ipconfig /all”

See the red block that’s your IP address and that should write on” Server IP”.

5. Restart NexmuTK Server, then verify in command prompt if port 2010 and 2501 are open.

If you see this then your server are ready, you should have no problem on connecting client and server.

For online version you need a modem with DMZ mode, When I try using port forwarding opening port 2010 and 2501 mostly many users can’t connected to this server so the solution is enabled DMZ mode on your modem/routers. This is an sample using Allied Telesyn:

PREPARE THE CLIENT:

1. Donwload NexusTK client 5.33 from download page.

2. Install it normally.

3. After installation in the shortcut (usually in desktop) click on it the choose properties. Edit in the target shortcut usually like this: “c:\program files\nexon\nextaeon\nexus.exe” [YOUR IP HERE] [2010]


“c:\nexus\nexus.exe” 127.0.0.1 2010
]]> http://www.nexmutk.com/2010/01/how-to-setting-nexmutk-server.html/feed 39